DRY BATH INCUBATORS  

Dry Bath Incubators
SPECIFICATION: DB-006  
Overall Dimension 30.5 x 33 x 10.5cm  
Power Consumption 450 watts  
Power Source 110V or 220V, 50/60HZ  
Operating Range Amb. +5oC - 110oC  
Temp Uniformity +/- 0.5o C  
Temp Stability +/- 0.1o C  
Temp Accuracy +/- 0.2o C  
Modular Blocks 3  
Net Weight  1.9Kgs (4.18 Lbs)  
Note: Ambient operating range:20oC - 30oC 
Blocks available: (Must be ordered separately) 
 
Part No. Tube Size Well size (MM)  No. of Wells
DB-1020 10mm 10.5 20
DB-1220 12mm 12.7 20
DB-1320 13mm 13.8 20
DB-1612 16mm 16.6 12
DB-1812 18mm 18.6 12
Remarks: 1)Other sizes of blocks are available upon request 
                  2)5ml Eppendorf Micro Tube blocks is available
Heat-up time of loaded blocks:
Temperature 37oC 56oC 100oC
Minutes (DB-006) 6,5oC 17.4oC 25.5oC

 
THERMOSTATIC WATER BATH

Model: YCW-010  

Models: YCW-01
&YCW-04M



SPECIFICATION: YCW-010 YCW-04M YCW-01
tank 22 L. 11 L. 22 L.
Temp Setting Digital Analog Analog
Temp readout LED digital Thermometer Thermometer
Temp range  Ambient to 99.99 C Ambient to 99.99 C Ambient to 99.99 C
Accuracy +/- 0.1o C +/- 0.4oC +/- 0.4oC
Temp uniformity +/- 0.1o C +/- 0.2o C +/- 0.2o C
Temp stability +/- 0.1o C +/- 0.1o C +/- 0.1o C
Temp Control Microprocessor Thermostat Thermostat
Water circulator  Yes Yes Yes
Watts 1000 1000 1000
Power 110 or 220 Vac 110 or 220 Vac 110 or 220 Vac

*Applications for biological clinical, medical, bio-chemical, industrial and educational laboratory

Semiconductos sensor and high accracy electronic PID control give you an accurate, high sensitive temperature control within +/- 0.02oC and uniformity of +/- 0.05o continuosly within 24 hours.

Select from three preser temp values dial for 25o C, 37o C and 56o C, or set anywhere by code switch digital setting within the given temperature range. REset dial to adjust and eliminate the possible difference of temperature between digital setting and LED display.
    LED digital provides direct readout of actual temperature.
    Optional stainless steel lids (not pictured) to maintain constant temperature with minimal energy expenditure.

VORTEX MIXER MODEL: VM-300

SPECIFICATION: Model: VM-300
Overall Dimension:  13(W)x16(D)x18(H)cm
Net Weight:             4.8Kgs (10.6 Lbs) approx.
Power Source:        110V/60Hz or 220V/20HZ (Your option and alternative)
Technical Data 
  • Variable control from 0-3200 RPM provides gentle or vigorous Vortexing for your mixing needs.
  • Equipped with high quality built-in rheostat for long operation.
  • 2 interchangeable mixing headss, ie:snap on the 34cm diameter rubber cup for conventional single tube mixing, or a 3" dia platform pad for multiple tubes and one flask mixing.
  • 2 - mode operation features "TOUCH" for intermittent operation, or switch activated operation at the flip of a switch for continuous mixing.
  • Stirring intensity can be controlled in "TOUCH" mode by applying the pressure to the mixing pad.
  • Heavy cast-iron body and rubber feet prevent mixer from slipping and creeping due to vibration.
  • Body finished with high quality baked enamel.
  • Comes with 3-wire cord and and plug (plug CEE or ANSI, your opinion)
  • Quality guaranteed, spare parts can be supplied readily
Optional Accessory:
VM-300-1       Single tube cup head
VM-300-2       3" platform head

Copyright © 2007, All Rights Reserved