EIA READERS (ELISA E INSTRUMENTOS)

Personal LAB

The compact automated analyser

for all microtiter systems.
Open Compact
  • Capable of handling all common types of micriplates with U, V or flat bottom wells in whole plates, single wells or strips of 8 to 12 wells.
  • All colorimetric substrate systems with signal between 400 and 700 nm, 8 filters positions; 5 filters preinstalled: 405, 450, 492, 550 and 620 nm
  • Incubation temperature controlled for each plate between ambient and 45ÁC.
  • Minimal bench space: 65 cm x 61 cm x 66 cm (width x depth x height)
  • Weight: 75 kg
  • External PC with separate printer.
  • Low power consumption: 450 W max.
  • Integral container for liquid waste (5 litres).
Flexible Robust
  • Primary samples in 11 - 16 mm diameter tubes with height 55 - 100 mm.
  • Sample identification with barcodes by wand (optional).
  • Optional automatic predilution of samples before transfer to microplate
  • Wash volume from 100 to 2000 µl, with up to 9 wash cycles.
  • Up to 6 assays on 2 microplates in a single run, ideal forsmall or large batches

External PC can store up to 500 assay protocols and 500 profiles with a maximum of 6 protocols each.

Flexible data handling with reports available on-screen, via printer and/or through an optional bi-directional RS-232 interface.
  • Easily removable holders for samples, reagents and tips.
  • Liquid level sensing for both samples and reagents with both the metal probe and disposable tips.
  • Internal and external probe washing to minimise carryover
  • Automatic checking of disposable tip pick-up for precise pipetting
  • Compatibility of assay combinations (profiles) checked to avoid interference
  • Spectrophotometer reads up to 3.0 OD with a single, dual or triple beam measurement.

 

Incorporated in Personal LAB
3 wash bottles, 2 for wash buffer and 1 for distilled water, a 5 l waste tank is contained within the instrument; there is the possibility to add externally an additional wash bottle including a liquid level sensor, as well as an additional waste tank
Pipetting station
Two precision dilutors and x, y plotter with two independent Z drives for disposable tips (Z1 and Z2), metal probe (Z2) and wash head (Z1).
Flexible microplate station
Can load up to 2 microplates in any common format. Incorporating: two incubators with independent temperature control; 30 positions for reagents and calibrators; wash head with 8 dispensers and 8 aspirators and 16 channel reader.


 

Microplate Reader Model Σ 960
 Specification:

Microplate carrier Accomodating all 96-well microplates
Wavelenth range 400 ~ 700nm
Filters Two narrow band interface filters mounted in a cassette 
Bandwidth: 10nm +/- 2nm 
Filters supplied: 450/600nm 
(P/N 5096001001) 
Options: 405, 490, 550, 650 
Any combination available on request
Photometric method Single or dual wavelength measurement
Photodetector (8) solid-state silicon photodiodes
Display LCD - 20x4 characters
Data Enttry Via (31) key touch panel
External outputs RS-232C biderectional interface 
-for data transfer to a computer with selectable 
baud rate 300, 600, 1200, 2400, 4800, 9600 
Parallel centronics interface 
-for data output to an external printer
Printer Built-in thermal printer (40) characters; 112mm width paper
Light Source Tungsten Halogen lamp 6v/10W 
(approx. 2000 Hrs. life)
Absorbance range 0.000 - 2.500 O.D.
Linearity 0.000 - 2.000 O.D. +/- 1.0% at 405nm
Reproducibility Less than 1.0% C.V. for O.D. greater than 1.000 at 405nm
Stability Drifting less than 0.005 O.D./hr after one hour warm-up time
Resolution 0.001 O.D.
Power 90V-126V/180V - 246V, 50/60Hz, 40W
Speed Less than 60 seconds for 96-well plate
Dimension 425mm in width, 320mm in depth, 150mm in height
Weight Net: 12kgs (26.5 Lbs.), Shipping: 15kgs (33.0 Lbs.)
Accessories -Tungsten Halogen lamp (installed) 
(P/N 0960013000) 
-2 speare fuses (P/N 0530500002 for 100/120V) 
(P/N 0530690002 for 220/240V) 
-4 rolls thermal paper (P/N 0910411003)
Options -RS-232C interface cable (P/N 0580690009) 
-Parallel centronics cable  (P/N 0580690008)

 

Model Σ 960 The AXIOM Model Σ 960 Microplate Reader is a single/dual wavelength photometer for enzyme immunoassays in microtiterplate. It can meause absorbance and calculate concentration of the 96 wells within 60 seconds by means of 8-channel optical system. Model M6 The Axiom Model-6 is a portable ELISA miniphotometer designed to read absorbance and calculate concentartion in either 1x8/1x12 micro well strip or round/square cuvette by interchangeable interface filter in wavelength range of 400 to 700nm.

 

 

Miniphotometer M6
Specification:

Wavelength Selection 400-700nm by interference filters
FIlters Narrow band interference filters 
Standard: 450nm P/N 5000601001 
Bandwidth: 10nm +- 2nm
Photodetector Solid-state silicon photodiodes
Display LCD-16 characters
External Outputs -RS-232 Interface 
-Parallel Printer Interface
Light Source  Focalized Tungsten lamp 6V/2W
Absorbance Range 0.000 - 2.000 O.D.
Linearity 0.000 - 1.500 O.D. +- (1.0%+0.01%)
Reproducibility Better than +- 0.0005 O.D.
Resolution 0.001 O.D.
Power -Input AC 120V or 240V 
-Output DC 12V/700mA adapter
Sample Compartment Strip holder:9x13mm standard well-strip 
Round cuvette holder: 12mm in diameter
Dimension: Whole unit: 150(W) x 170(D) x 50(H)mm 
Optical unit:50(W) x 50(D) x 50(H)mm
Weight: 850 grammes (with power adapter)

Optional Accessories:
 

1. Cuvette holder (10mm square)  
P/N S000602003  
2. Filters:405nm P/N S000601005 
                490nm P/N S000601002  
                550nm P/N S000601003 
                600nm P/N S000601004 
                650nm P/N S000601006		 3. RS-232 cable P/N 0570006004 
4. 40-column printer P/N 0910040002 
5. Centronics cable P/N 0570006006 
*Filters for other wavlengths  
are available upon special request.

  Copyright © 2007, All Rights Reserved